Milu In-wall Cistern with Odourless By Expella for Floor Mount Pans
Milu In-wall Cistern with Odourless By Expella for Floor Mount Pans
Milu In-wall Cistern with Odourless By Expella for Floor Mount Pans
Milu In-wall Cistern with Odourless By Expella for Floor Mount Pans
Milu In-wall Cistern with Odourless By Expella for Floor Mount Pans
Milu In-wall Cistern with Odourless By Expella for Floor Mount Pans
Milu In-wall Cistern with Odourless By Expella for Floor Mount Pans
Milu In-wall Cistern with Odourless By Expella for Floor Mount Pans

Milu In-wall Cistern with Odourless By Expella for Floor Mount Pans

2303900

$545.00
/
Tax included. Shipping calculated at checkout.
  • In stock, ready to ship
  • Backordered, shipping soon

Make embarrassing toilet smells and clutterd bathrooms and powderooms a thing of the past, when you install the Milu In-Wall Cistern with Odourless by Expella. Your toilet pipes and cistern will be hidden behind the wall for a modern and sleek look while your bathroom sanctuary will remain free of unpleasant smells with Expella’s integrated toilet ventilation system that removes odour before it leaves the toilet bowl.

Combine the Milu In-Wall Cistern with your choice of flush plate and floor mounted toilet pan to match your bathroom design.


  Download Milu In-wall Cistern with Odourless by Expella for Floor Mount Pans fact sheet

Integrated Odourless by Expella system that removes 99.7% of toilet odour before it leaves the bowl

Universal cistern design compatible with a range of floor mount pans and flush plates

Match your bathroom aesthetic with your choice of flush plate

  • Water rating: WELS 4 Star at 4.5L flush and 3L flush. LIC. 1848.
  • Compliance: Complies with Australian Standards – AS1172.1, AS1172.2, WMTS-425:2016
  • Trap configuration: Universal
  • Water inlet: Top left
  • Power supply: 12 volt, 1.5amp (transformer provided)
  • Fan (Odourless by Expella): Expella I-fan
  • Noise: 41.2 dBA (12 Volt), 36.5 dBA (9 Volt) at 3m
  • Domestic
  • Hotel
  • Commercial

The Milu In-wall Cistern is a standard in-wall cistern with Odourless by Expella pre-installed inside the cistern. The cistern must be installed by a qualified plumber in accordance with AS/NZS 3500. Installation requires the addition of an electrical power source for the Odourless by Expella system. Have a qualified electrician install a general power outlet (GPO) within 3.5 meters of cable length to the toilet. The location of the GPO should allow future access to the 12VDC power transformer.

Expella recommends that the Odourless by Expella system switches on with the Expella PIR Motion Sensor or with the bathroom light, it can also be shared with the exhaust fan switch or by a designated switch depending on your preference.

The Milu In-wall Cistern fits a 90mm wall cavity with 600mm stud spacing. It is suitable for timber studs only with a 90x45mm stud cross section.

The Milu In-Wall Cistern is compatible with floor mount pans. Check the dimensions of your selected pan for exact final set out heights for the flush and waste pipe, prior to installation. Heights may vary depending on the brand and type of pan. 

The cistern should only be used with Milu branded flush plates (see the range on Expella’s website), note that the flush plate requires a 30mm separation between the finished wall and the cistern. 

A full installation manual is provided with the toilet suite and further information can be found on Expella’s website.

All cistern components (inlet valve, flush valve and Odourless by Expella system) are accessible by removing the flush plate. The Odourless by Expella system is secured within an ultrasonically welded ABS plastic case and requires no maintenance. As with all electrical products, access to the adaptor is recommended.

  • Cistern: 10 years
  • Odourless by Expella: 3 years
  • Inlet and flush valve: 2 years

Frequently purchased together

Recently viewed